Chapter Review

1. Which of the following is not a dynamic routing protocol?
   1. OSPF
   2. RIP
   3. ICMP
   4. EGP
2. What is the name for the use of metrics based on the number of hops between a source and a destination?
   1. Distance vector routing
   2. Loose source routing
   3. Link-state routing
   4. Open shortest path first routing
3. What is the primary difference between OSPF and RIP?
4. Which of the following fields is not included in a RIP version 1 route?
   1. Metric
   2. Subnet mask
   3. IP address
   4. Address Family Identifier
5. What is the primary criticism leveled at RIP?
6. In a Windows routing table, what column contains the address of the router that should be used to reach a particular network or host?
   1. Network Destination
   2. Netmask
   3. Gateway
   4. Interface
7. What is the name of the process of updating routing tables to reflect changes in the network?
   1. Divergence
   2. Link-state routing
   3. Minimal routing
   4. Convergence
8. What does a router do when it fails to find a routing table entry for a particular network or host?
9. On a Windows system, what command do you use to display the contents of the routing table?
10. The Next Hop IP Address in a RIP version 2 route ends up in which column of a Windows routing table?
    1. Network Destination
    2. Netmask
    3. Gateway
    4. Interface
11. In a Windows routing table, what is the Network Destination value for the default gateway entry?
    1. 0.0.0.0
    2. The address of the network to which the router is connected
    3. 255.255.255.255
    4. The address of the router's network interface